Development Trend Of Harvesters

  Development trend of harvesters

  The development trend of the harvester is to use new materials to further reduce the weight; the use of low vibration engine and advanced vibration isolation device and reasonable configuration of parts to reduce the vibration of the human body harm; improve the mechanical processing and assembly accuracy, Exhaust system to reduce noise; add a variety of safety protection devices to improve operational safety; in the hanging cutting machine on the addition of shrub chopping device, to simplify the removal of shrub cleaning process.

  The maintenance of the harvester includes the maintenance of the whole machine and the management of the small parts.

  On the connection of debris to be cleaned, do a good job lubrication or oil seal; if the rusty parts of the paint peeling lead to bare, need to paint rust. If the rubber belt, you have to wipe dry to prevent pests harm; metal chain can be used kerosene or diesel cleaning, and then into the oil for 15-40 minutes, or soaked overnight, remove the dry to no drip Coated with softened oil, and then wrapped in kraft paper wrapped in a dry and ventilated place, so as to avoid rotten deformation.

  Some of the harvesters are rubber and plastic products, they are easily aging after sunshine deterioration, less resilient, affecting the use of the coming year. In the custody of these products, it is best to use paraffin oil coated on its surface, and then placed in a direct sunlight without ventilation and dry place. Plastic products and springs and other objects will be due to long-term pressure or improper storage and deformation, so the spring to relax, the conveyor belt and the like, separate storage.

  In addition, some random use of equipment, especially special tools and a variety of spare parts, need to be stored separately, after use into the original place, so as to avoid loss caused by chaos.