The Harvester Is A Mechanized Harvesting Crop That Finishes Harvesting

  The harvester is a mechanized harvesting crop that finishes harvesting, threshing, and concentrating the grain into the storage bin, and then transport the grain to the truck through the conveyor belt. Can also be used for artificial harvesting, rice, wheat and other crops laid in the field of straw, and then use grain harvesting machinery to pick up threshing. Harvesting rice, wheat and other cereal crops and straws crop harvesting machinery. Including harvesters, cutting machines, balers, grain combine harvesters and grain threshers. Care should be taken when handling harvesters:

  1, before the harvest before: check the harvester parts are intact.

  2, the machine into the field, and then pull the straw pull to the job location, put down the grain table, the grain exclusion gate pulled to "open" position, then the food bag hook hanging on the food bag, the machine fired ridge vertical position.

  3, the commissioning machine: dust control handle to the "standard" position, vice variable handle according to crop conditions, select the pull to the "high speed" or "low speed" position, row of grass handle into the "grass" or "grass "position.

  4, down the cutting table, so that the front of the Wo Wo device down to the surface of 5-10cm away from the field.

  5, will be out of the clutch and cut off the clutch handle to the joint position.

  6, the main variable speed handle slowly push forward, so that the machine began to harvest.

  7, when the crop began to enter the threshing mouth, the operation of the threshing depth manually adjust the switch, so that the spike from the depth of the location of signs.

  8, the crop after all harvest, will cut the clutch handle to the separation of the position.

  9, until the food is no longer out of grain, the threshing clutch clutch handle to the separation position.

  10, check the machine parts switch is closed.

  11, to reduce the throttle, the engine flameout.

  12, the harvester back to the placement point and a certain inspection and maintenance.